POE SPLITER

(24 reviews) In Stock

₵45.00

Product Highlights

Retrofit Legacy Gear: Converts non-PoE devices into PoE-compatible hardware instantly. Cost-Effective Installation: Eliminates the need for professional electricians to install new wall outlets. Flexible Placement: Allows devices to be mounted on high ceilings or outdoor poles without nearby power. Adjustable Voltage: Many models feature a toggle for 5V, 9V, or 12V DC output. Clean Aesthetics: Reduces cable clutter by using a single cable run from the source. Gigabit Pass-through: Higher-end models support 10/100/1000 Mbps data speeds. Safety First: Provides short-circuit and over-voltage protection for sensitive electronics.

Why Shop With Us

Fast Delivery

Delivery within 24-48 hours in Accra, 2-5 days nationwide

Secure Payment

100% secure payment options with SSL encryption

Easy Returns

7-day return policy for damaged or wrong items

24/7 Support

Dedicated customer support available anytime

Product Specifications

Type:POE SPLITER

Compatibility:Universal

A PoE (Power over Ethernet) Splitter is a critical networking device that allows non-PoE hardware to benefit from a PoE-enabled network. While a PoE switch or injector sends both power and data down a single Ethernet cable, many standard devices (like older IP cameras or home routers) have separate ports for data and power. The PoE splitter acts as the final \"unpacker,\" receiving the combined signal and splitting it into two distinct outputs: a standard RJ45 Ethernet plug for data and a DC barrel jack for power.

This device is a \"problem solver\" for installations where pulling new electrical wiring is too expensive or physically impossible. By using a PoE splitter, you can mount a non-PoE device up to 100 meters away from a power outlet, as long as it is connected to a PoE switch. Most splitters are \"Active,\" meaning they safely negotiate with the switch to ensure the correct voltage is delivered, while some offer adjustable switches to toggle between 5V, 9V, or 12V to match the specific needs of your hardware.

Technical Specifications

Input Interface:1 x RJ45 Port (PoE + Data In) Output Interfaces: 1 x RJ45 Port (Data Out) + 1 x DC Jack (Power Out) Selectable Output Voltage: 5V, 9V, or 12V DC (Model Dependent) Standard Compliance: IEEE 802.3af (15.4W) or IEEE 802.3at (30W) Maximum Transmission Distance: 100 Meters (328 Feet) Data Rate: 10/100 Mbps or 10/100/1000 Mbps (Gigabit) DC Connector Size: Commonly 5.5mm x 2.1mm (Includes adapters in some kits) Efficiency: Typically > 80% Isolation Protection: 1.5kV High-Voltage Isolation Operating Temperature: -10°C to +45°C Indicators: Power / PoE Status LEDs